Universal long axle for MiniZ (W) in blue 6061 aluminum

Pair of long drive shafts with cardan joint, made of 6061 aluminum in blue color, machined with high precision to guarantee long life and resistance.

These long cardan shafts have 5 degrees more turning angle than shafts from other manufacturers.

They are valid for Kyosho AWD MA020 chassis in wide front axle configuration and for other 1/28 scale chassis that use long axles of the same characteristics.

Furthermore, on these axles, the thread on the 2mm shaft where the wheel and nut are mounted has been extended by a total of 0.8mm to allow for the convenient use of washers to adjust the offset, whether front or rear. This ensures the nut still has several turns of spline available before reaching its limit.

In the following image you can see the RC-Aurora axles, both the one we are dealing with, the long MW-003-L, and the short one, MW-003-B, both in blue, compared with a red axle from another manufacturer.

You can see the increase in the working angle of the axle shaft, as well as in the thread length on the 2mm part of the shaft.