Plastidip Metallic Silver Shine Effect Finish (3Kg/3.78L) Sprayab

3Kg / 3.78L can of Plasti Dip paint, in Silver Metallic Shine Effect color, ready to spray (Sprayable).

Plasti Dip " Effects " allow you to achieve different finishes and tones with Plasti Dip paints, therefore requiring a base coat of Plasti Dip base paint . The Plasti Dip "Effects" range cannot be used on a surface that has not been previously coated with Plasti Dip base colors.

In this case, the "silver metal shine effect" will give us, as its name indicates, a silver metallic tone with a shiny finish.

This product comes ready to spray , as it already contains the necessary solvent. Application is as easy as opening the can, mixing the product well, pouring it into the reservoir of the spray gun you will be using, and spraying it onto the piece previously painted with a basic Plasti Dip color.

Plasti Dip protective liquid rubber is used to coat objects and protect them from inclement weather (water), UV rays, etc.

Once dry, it remains flexible and completely odorless. It is waterproof.

Plasti Dip liquid rubber forms a protective rubber coating that is very useful for sealing, cushioning, and framing. It is also used as an anti-slip product. It is especially recommended for indoor and outdoor use as it withstands extreme temperatures, from -34°C to 93°C. It is also resistant to acids, alkalis, salts, oils, and many other chemical agents.

It contains no silicone and once dry, it can be easily removed by pulling it off like a vinyl sticker.

Especially adherent to metals, wood, plastics, glass, fabrics, wool, stones, fiberglass or carbon fibers, etc. To increase its adhesion, you can use the primer product specially designed for Plasti Dip liquid rubber.

Instructions for use:

The surface to be protected must be dry, clean, and free of any substances that may hinder adhesion. Before opening the can and spraying the product, shake gently. Let it sit for a few minutes to avoid air bubbles.

- We will need to apply several coats of Plasti Dip base paint, allowing a minimum drying time of about 15 minutes between each coat (applied at approximately 20°C ambient temperature), and then spray on the desired number of coats of this Plasti Dip Bright Silver Metallic Effect to modify the initial color. The more coats we apply, the more saturated the effect will be.

Technical information:

Stable at temperatures between -34ºC and 93ºC.
- Optimal application temperature, around 20ºC.
- Minimum drying time upon contact: approx. 10 min.
- Complete drying time: 1 hour, depending on the thickness and number of layers applied.
- The manufacturer recommends layers of 0.2mm thickness, which will require approximately 150g of product per m2.