Plastidip Classic Muscle Orange Hemi 1970-72 Spray

Plastidip Classic Muscle Orange Hemi 1970-72 Spray

Plastidip Classic Muscle Orange Hemi 1970-72 Spray
  • Price: 21,50 Eur VAT included
  • SKU: 075815113108
  • Reference: 11310-6
  • Category: PlastiDip Spray Classic Muscle colors
  • Weight: 400 gr
  • Dimensions: 21 x 7 x 7 cm
  • Availability: Last units
Compartir ficha:

Plasti Dip spray paint can, from the "Classic Muscle" range, in Hemi Orange 1970-72 color.

This paint, also called "liquid rubber", is water resistant, and is used to coat objects while protecting them from inclement weather (water), UV rays, etc.

Once dry it remains flexible and completely odorless.

Plasti Dip liquid rubber is a protective rubber coating that is very useful for sealing, cushioning, and framing. It is also used as an anti-slip product. It is especially recommended for indoor and outdoor use as it withstands extreme temperatures, from -34°C to 93°C. It is also resistant to acids, alkalis, salts, oils, and many other chemical agents.

It also insulates against electricity, creating an effect similar to that of insulating tape or heat-shrink tubing.

It contains no silicone and once dry, it can be easily removed by pulling it off like an adhesive.

Especially adherent to metals, wood, plastics, glass, fabrics, wool, stones, fiberglass or carbon fibers, etc. To increase its adhesion, you can use the primer product specially designed for Plasti Dip liquid rubber.

Instructions for use:

The surface to be protected must be dry, clean and free of substances that hinder adhesion.
Before opening the bottle and spraying the product, shake gently. Let it sit for a few minutes to avoid air bubbles.

We will need to apply several layers of paint, allowing a minimum drying time of about 15 minutes between each layer.

Technical information:

Stable at temperatures between -34ºC and 93ºC.
Optimal application temperature, around 20ºC.
Minimum drying time to contact: approx. 5 min.
Complete drying time: 1 hour, depending on the thickness and number of layers applied.
The manufacturer recommends layers of 0.2mm thickness, which will require approximately 150g of product per m2.


Download the safety data sheet

  • Price: 21,50 Eur
  • SKU: 075815113108
  • Reference: 11310-6
  • Category: PlastiDip Spray Classic Muscle colors
  • Weight: 400 gr
  • Dimensions: 21 x 7 x 7 cm
  • Availability: Last units

There are no downloadable documents for this item.