Plastidip 3 Sprays Matte Black + Microfi (Special for 15" Rims)

Set of 3 cans of matte black Plasti Dip paint. This pack is designed for painting small-diameter car rims. For rims larger than 15 inches, we recommend using 4 cans of Plasti Dip paint. This pack also includes a microfiber cloth, ideal for cleaning the rims, car body, and interior.

Plasti Dip paint, also called "liquid rubber", is water resistant, and is used to coat objects while protecting them from the elements (water), UV rays, or simply to change their color and appearance.

Once dry it remains flexible and completely odorless.

Plasti Dip liquid rubber creates a protective rubber coating that is very useful for sealing, cushioning, and framing. It is also used as an anti-slip product. It can be used both indoors and outdoors as it withstands extreme temperatures, from -34°C to 93°C. It is also resistant to acids, alkalis, salts, oils, and many other chemical agents.

Plasti Dip paint insulates against electricity, acting like an insulating tape or heat shrink tubing.

It contains no silicone and once dry, it can be easily removed by pulling it off like an adhesive.

Especially adherent to metals, wood, plastics, glass, fabrics, wool, stones, fiberglass or carbon fibers, etc. To increase its adhesion, you can use the primer product specially designed for Plasti Dip liquid rubber.


Instructions for use:

The surface to be protected, in this case the rims of a car, must be dry, clean and free of substances that hinder its adhesion.

Before opening the bottle and spraying the product, shake gently. Let it sit for a few minutes to avoid air bubbles.

We will need to apply several layers of paint, allowing a minimum drying time of about 15 minutes between each layer.

Technical information:

Stable at temperatures between -34ºC and 93ºC.
Optimal application temperature, around 20ºC.
Minimum drying time to contact: approx. 5 min.
Complete drying time: 1 hour, depending on the thickness and number of layers applied (ideally 4-6 layers).
The manufacturer recommends applying layers 0.2mm thick, which will require approximately 150g of product per m2.