KO Propo Servo BSx3-one10 Response (0.08sec/60 13.3Kg)

High-end, low-profile digital servo compatible with the HCS system , model BSX3 One10 RESPONSE , manufactured by KO Propo .

Specifications of the BSX3 One10 Response servo

Speed: 0.08s@60°(7.4V) / 0.09s@60°(6.0V)
Power: 13.3kg-cm(7.4V) / 10.5kg-cm(6.0V)
Dimensions: 40.5 x 26 x 21 mm (Low profile)
Weight: 48.0g
Operating voltage: 6.0 to 7.4V (Lipo, LiFe, NI-MH)

The gears in this servo are made of hardened aluminum, which is much stronger than plastic or composite gear assemblies. Being made of aluminum, they are also very lightweight. The central part of the servo housing is also made of aluminum, in this case for heat dissipation.
It uses a brushless motor and has ball bearings.

For which vehicles do we recommend this high-performance servo?

The BSX3 One10 Response servo is designed for use in the steering mechanism of 1/10 scale electric or gas-powered RC cars . Its response speed and power make it perfect for this position on the chassis of racing cars.
1/10 EP Track (electric), 1/10 GP Track (gasoline), 1/10 F1 EP, and 1/10 TT 2WD and 4WD are the competition categories for which this steering servo has been designed. Its low-profile housing also facilitates its use in these chassis, where space is at a premium.

What features stand out in the BSX3 One10 Response?

This servo, of the Response type (fast response, suitable for the steering system of 1/10 scale cars), comes standard ready to work at both 6V and 7.4V . If we want to program this servo to modify its characteristics, we will need to use a PC and the ICS USB HS adapter along with the " Servo Model Selector " device, both sold by KO Propo.

Can this high-performance servo work in HCS mode?

This BSX3 One10 Response servo is designed to operate at HCS ( High-Speed Communication System ). This innovative system, included by KO Propo in its competition-oriented products, shortens the time it takes for the radio signal to travel from the receiver to the servo. Therefore, to use this fast-response communication system, you will need an HCS-compatible KO Propo receiver (the KO Propo KR-115FHD ) and a small "RX Mode Selector" device that allows you to activate HCS mode on the channel to which you will connect this servo.

With the HCS system we do not modify the working speed of the servo but the time it takes to receive the signal from the transmitter.