Plastidip Protective Spray Rubber Metallic Silver Effect

Plastidip Protective Spray Rubber Metallic Silver Effect

Plastidip Protective Spray Rubber Metallic Silver Effect
  • Price: 20,11 Eur VAT included
  • SKU: 075815112101
  • Reference: 11210-6
  • Category: PlastiDip Spray Effects Finishes
  • Weight: 400 gr
  • Dimensions: 30 x 20 x 15 cm
  • Availability: Out of stock
This item is out of stock for direct purchase. You can request a quote instead.
Compartir ficha:

Plasti Dip - Metallic Silver Effect Spray 400ml

Water resistant and surface protective

To use this effect, it is always necessary to apply a base with basic colors.

It is used to coat objects and protect them from inclement weather (water), UV rays, etc.
Once dry, it remains flexible and completely odorless. It is waterproof.

Plasti Dip liquid rubber is a protective rubber coating that is very useful for sealing, cushioning, and framing. It is also used as an anti-slip product. It is especially recommended for indoor and outdoor use as it withstands extreme temperatures, from -34°C to 93°C. It is also resistant to acids, alkalis, salts, oils, and many other chemical agents.

It does not contain silicone and once dry, it can be easily removed.

Especially adherent to metals, wood, plastics, glass, fabrics, wool, stones, fiberglass or carbon fibers, etc. To increase its adhesion, you can use the primer product specially designed for Plasti Dip liquid rubber.

The finish of this metallic silver color is satin.

How to use Plasti Dip:

The surface to be protected must be dry, clean, and free of any substances that may hinder adhesion. Before opening the can and spraying the product, shake gently. Let it rest for a few minutes to avoid air bubbles. Apply several coats of paint, allowing a minimum drying time of approximately 10 minutes between each coat.

Technical information about Plasti Dip:

Stable at temperatures between -34ºC and 93ºC.
Optimal application temperature, around 20ºC.
Minimum drying time to contact: approx. 5 min.
Complete drying time: 1 hour, depending on the thickness and number of layers applied.
The manufacturer recommends layers of 0.2mm thickness, which will require approximately 150g of product per m2.

If you have any questions about applying liquid vinyl, this is a good guide.

Other metallic effects plastidip

  • Metallic effect vinyl in blue
  • Metallic effect vinyl in red
  • Metallic effect vinyl in green
  • Metallic effect vinyl in Violet color
  • Metallic effect vinyl in copper color
  • Metallic effect vinyl in gold color

  • Download the safety data sheet
  • Price: 20,11 Eur
  • SKU: 075815112101
  • Reference: 11210-6
  • Category: PlastiDip Spray Effects Finishes
  • Weight: 400 gr
  • Dimensions: 30 x 20 x 15 cm
  • Availability: Out of stock

There are no downloadable documents for this item.