Plastidip Liquid Gum Spray Fluorescent Violet

Plasti Dip - Protective and waterproof liquid glue in Blaze Fluorescent Violet spray. 400ml can. This color requires a white base to achieve the desired fluorescent tone.

It is used to coat objects and protect them from inclement weather (water), UV rays, etc.

Once dry, it remains flexible and completely odorless. It is waterproof.

Plasti Dip liquid rubber is a protective rubber coating that is very useful for sealing, cushioning, and framing. It is also used as an anti-slip product. It is especially recommended for indoor and outdoor use as it withstands extreme temperatures, from -34°C to 93°C. It is also resistant to acids, alkalis, salts, oils, and many other chemical agents.

It does not contain silicone and once dry, it can be easily removed.

Especially adherent to metals, wood, plastics, glass, fabrics, wool, stones, fiberglass or carbon fibers, etc. To increase its adhesion, you can use the primer product specially designed for Plasti Dip liquid rubber.

Instructions for use:
The surface to be protected must be dry, clean, and free of any substances that may hinder adhesion. Before opening the can and spraying the product, shake gently. Let it sit for a few minutes to avoid air bubbles.
We will need to apply several layers of paint, leaving a minimum recommended drying time of about 10 minutes between each layer.

Technical information:

-Stable at temperatures between -34ºC and 93ºC.

-Optimal application temperature, around 20ºC.

-Minimum drying time on contact: approx. 5 min.

-Complete drying time: 1 hour, depending on the thickness and number of layers applied.

-The manufacturer recommends layers of 0.2mm thickness, which will require approximately 150gr of product per m2.

Download the safety data sheet