Mini-Z RWD AUDI R8 LMS 2015 White (W-MM/KT531P)

Kyosho MiniZ MR03 RWD Audi R8 LMS 2015 White RTR

Mini-Z RWD (rear wheel drive) with the body of the Audi R8 LMS in white, in readyset format. Includes MR03 wide chassis (W) with motor in MM position (98mm wheelbase (LL)), body and Syncro KT-531P transmitter.

What is the novelty of this MR03 chassis called RWD with respect to the other versions of the MR03 chassis?

The family of the Kyosho Mini-Z MR03 is constantly evolving and this time uses the FHSS data transmission protocol, which differentiates it from other versions of the same chassis, working on ASF, MHS or FHS frequencies. This new frequency for the Mini-Z scale cars, the FHSS, also implies that the transmitter included into this readyset product is different from the other versions, so this time it includes the new transmitter, Syncro KT531P.
This transmitter and the electronics (ESC) of this chassis, are NOT compatible with the existing ASF / MHS / FHS 2.4 GHz transmitter systems used so far in previous Mini-Z MR03 generations. The Syncro KT-531P transmitter allows many settings, such as the ST Trim, the TH Trim, the ST Dual Rate, and the control of LED light kits.

The Mini-Z RWD supposes the last generation of Mini-Z 2WD appeared until the moment.

The MiniZ RWD comes in a Readyset format, (ready to run) which means that it includes 2.4 GHz FHSS KT531-P transmitter, chassis MR03 assembled and Porsche body mounted and painted ready to be used.

This new line of Mini-Z RWD readyset cars is intended to replace the range of Mini-Z MR03 Sports2. As with all other Mini-Z cars, we will only need 4xAAA batteries for the transmitter and 4xAAA batteries (we recommend rechargable AAA batteries (R3)) for the chassis.

In addition, for greater control of the chassis when we use it on sliding surfaces, we can plug a gyro, ref. MZW431 (sold separately)

MR03 RWD Features

- This new chassis series MR03 includes the Syncro KT-531P transmitter that has multiple adjustment options. Supplied with foam steering wheel.
- New electronics (ESC - Electronic Speed Controller) inside the chassis that greatly improves the feeling into the corners (channel 1).
- Highly detailed Audi R8 LMS 2015 body, mounted, painted and ready to be used on the track.
- Complete set of bearings (7 units) already installed.
- Chassis compatible with all Kyosho Autoscale bodies for Mini-Z Racer (1/28 scale) and those manufactured by TRP Scale (Renault Megane 2008/2010 and Mosler MT900). You will need to use the correct motor mount corresponding to the wheel base size. This readyset is supplied with the MM motor mount for 98mm wheelbase (LL) bodies.
- The front suspension includes the VCS system that optimizes the camber angle depending on the suspension travel.
- In the case of using the MZW431 gyro, we can adjust its gain from the electronics installed in the same chassis. (These adjustments can be made from the transmitter, if using the KT-432PT syncro Touch transmitter, sold separately.
- This chassis is compatible with the optional lights kit, consisting of two front white lights and two red rear lights (ref.MZW429R), sold separately

MR03 RWD Audi R8 LMS 2015 Technical Data:

Length: 177 mm
Width: 76.5mm
Height: 45.0 mm
Ground clearance: 6 mm
Wheelbase: 86 ~ 106mm (86,90,94,98,102,106)
Front wheel Offset (narrow): + 1.5mm (rim for RWD)
Rear wheel Offset (wide): + 1.5mm (rim for RWD)
Gear ratio: 7.3.6.3.5.5.4.9: 1
Weight: 135 g approx.
Motor: Brushed, 130 Class

Necessary for use (not included):

- 4x AAA alkaline batteries or NiMH rechargable batteries for the chassis (we recommend the RP900 or the TRP Scale RP747).
- 4 AAA alkaline batteries or NiMH rechargable batteries for the transmitter