Kyosho 1/18 Drobe Racer G-ZERO Dynamic White Readyset(Kyosho)

Kyosho Drone Racer with G-Zero body, in readyset format, meaning it includes everything needed to use it.

Kyosho's Drone Racer drones are the first commercially available racing drones to use a pistol-grip transmitter, similar to those used in RC cars. This low-flying competition aircraft allows the pilot to choose between two different altitude settings (35cm/60cm) and is very easy to carry with a pistol-grip transmitter.

With this Drone Racer, you don't need to be an advanced RC pilot because the technology behind it does all the hard work. So, with the Drone Racer, you can easily perform maneuvers and races against similar aircraft, just like in science fiction movies. It can fly both indoors and outdoors.

Advanced ultrasonic sensors installed in the base of the Drone Racer allow us to land, take off, and fly at a predetermined stable altitude (using a switch located on the transmitter handle). It features a 6-axis gyroscope (3 axes for speed sensors and 3 axes for acceleration sensors).

Another new feature of the Drone Racer is the variable tilt of the motor mounts. By adjusting this setting, the propellers can operate at 0°, 10°, or 20° tilt (0°: maximum stability / speed 30km/h or 20°: less stability / speed 34.5km/h).

This Drone Racer comes from the factory set to the "beginner" sensitivity level. As your piloting skills improve, you can adjust the aircraft's sensitivity to the "intermediate" level, which allows for much more aggressive maneuverability and performance. In addition to these sensitivity levels, there are several customizable settings that allow you to increase or decrease the sensitivity of many parameters, making the Drone Racer fly smoothly or aggressively, depending on your preference.

All this new technology in the aircraft control system makes it easier for us to quickly reach high levels of skill and piloting ability.

The Readyset includes:

- G-Zero model drone racer assembled and ready to fly.
- Syncro KT-231P 2.4GHz pistol-grip transmitter with many settings. The handle has a switch to adjust the Drone Racer's altitude.
- 3.7V-1000mAh LiPo battery. Flight time, approx. 10 min.
- USB charger with automatic cut-off when charging is complete. Charging time is between 1 and 2 hours, depending on the USB power source used.
- USB cable to connect the Drone Racer to a personal computer (speed controller adjustment).
- Customizable LED lights on the front turret.
- Infrared tachometer included in the Drone Racer electronics.
- Extra set of replacement propellers.

Not included in this readyset:
- 4x AA batteries for the transmitter.
- Computer with USB port or USB charger to charge the Drone Racer battery.