Calibrated packing ring 2.05x3.5mm (0.1/0.2/0.3)

Atomic, known manufacturer of parts for our radio controlled cars, manufactures many accessories that are not parts as such, but indispensable accessories to make a good setup to our car. In this case, we have front calibrated washers to use in the height setup of our kysoho miniz. Different thicknesses are supplied to be able to accurately calibrate the heights of the chassis, installing said calibrated washers in the lower part of our front journals, in this way we get our miniz, lower from the front and shorten the front suspension travel. p>

Is it necessary to use the calibrated washers?

It is important, since they require pressure washers and calibrated washers, the only ones that offer us the precision of being flat and therefore we can know in what quantity we lower or raise our miniz or radio control car. If we use pressure washers to regulate the height of the chassis, they have a certain belly so that when we tighten with a screw this makes a contrasion so that with the vibrations the screw does not come off. As you can see each type of washer has its utility and in the case of calibrated washers are used only to regulate spaces or heights.