BZ2017 Alu. Rear Toe in Mount (3 dot)(RC Atomic)

Original spare part of the rear frame manufactured in aluminum (to which the axes of suspension are attached), for the Atomic BZ2017 model. This part replaces the original, and is responsible for having, in the rear, 3 degrees of convergence on the two rear wheels and two levels of adjustment of the "Anti-Squad" angle. in the rear trapeze.

¿In what? influences the rear convergence in the BZ2017 chassis?.

When we adjust our chassis with convergence on the rear wheels, we get on the one hand to increase the understeer of our car. The chassis will be much more stable in the braking and in the exit of the curves, while we accelerate. We will gain traction on the rear axle, although we will lose some speed on the straight.

¿How do we adjust the & quot; Anti-Squad & quot; back in the BZ2017?

The & quot; Anti Squad & quot; it is the angle of the lower rear trapeziums relative to the chassis. By modifying this angle (by lifting the rear part of the trapezoids) we get that the rear springs are not the only ones that have to support all the sinking of the rear train in the accelerations, especially when we use soft springs in the suspension. This effect has to do with the transfer of weights when accelerating and braking. The rear frame allows us to adjust this angle in two positions. Either leave it without angle (mount the rear armor with the three points visible in the armor facing up) or angle the trapezoids putting the armor upside down, with the three points facing down. /p>

Atico also has some sets of spacers of 0.1mm and 0.2mm thickness, with references: BZ17-UP01-1 and BZ17-UP01-2 < /strong>, that we can locate under this rear armor, to lower the center of gravity of the chassis and increase the angle Anti-squad.